MEBAC® coated Renovation and Embedded Nosings

MEBAC® Renovation and Embedded Nosings

We offer a complete line of versatile MEBAC® extruded aluminum nosings for stair treads for both new construction and renovation and for either concrete or metal stair treads. Our economical nosings offer superior coefficient of friction for slip resistance under wet or dry conditions, low maintenance, and high strength to weight ratio.

MEBAC® Coated Renovation and Embedded Nosings

Aluminum Renovation Nosings are specially designed with a unique tapered rear edge, to alleviate the potiental trip hazard of conventional nosings.  Economical and easy to install for almost all retrofit applications. Renovation Nosings are furnished in lengths up to 20' and come in widths of 3-3/4" and 7" with countersunk holes for easy field installation.

MEBAC® Aluminum Embedment Nosings are made with a durable 1/4" thick extrusion to guard against impact cracking. Economical and suitable for stair treads in new construction, Embedment Nosings can be used in poured in place, pan type or terrazzo stairs. Embedment Nosing are furnished in lengths up to 20' and are available in 3" and 4" widths in three different styles.

Click on the links below to learn more about the benefits MEBAC® coated embedded nosings can bring to your business.

Type A

Type A Embedded NosingMEBAC® Nosings for filled pan treads with a 7° sloped riser. Available in 3" or 4" width, with EZ-Anchor (shown) or with countersunk holes, nuts, bolts, and wing anchors.

Features

  • 1/4" thick extrusion guard
  • Readily available in lengths up to 20'
  • Consistently high C.O.F. under a wide range of conditions
  • Listed as slip resistant by Underwriters Laboratories

Advantages

  • Durable, versatile
  • Reduced impact cracking
  • Meets or exceeds BOCA, UBC and OSHA standard loading requirements and exceed Mil C-81346A, 4.7.4 fire resistance requirements

Surfaces

  • Aluminum MEBAC®

Finishes

  • MEBAC®
Type C

Type C Embedded NosingsMEBAC® Nosings for filled pan treads and poured in place. Available in 3" or 4" width, with EZ-Anchor (shown) or with countersunk holes, nuts, bolts, and wing anchors.

Features

  • 1/4" thick extrusion guard
  • Readily available in lengths up to 20'
  • Consistently high C.O.F. under a wide range of conditions
  • Listed as slip resistant by Underwriters Laboratories

Advantages

  • Durable, versatile
  • Reduced impact cracking
  • Meets or exceeds BOCA, UBC and OSHA standard loading requirements and exceed Mil C-81346A, 4.7.4 fire resistance requirements

Surfaces

  • Aluminum MEBAC®

Finishes

  • MEBAC®
Type RS

Type RS Embedded NosingsMEBAC® Renovation Nosings are available in 7" (RS-7 shown) or 3 3/4" (RS-3.75) width. Furnished with countersunk holes for easyfield installation.

Features

  • Unique tapered rear edge
  • Readily available in lengths up to 20' long
  • Consistenly high C.O.F. under a wide range of conditions
  • Listed as slip resistant by Underwriters Laboratories

Advantages

  • Durable, versatile
  • Economical and easy to install
  • Meets or exceeds BOCA, UBC and OSHA standard loading requirements and exceed Mil C-81346A, 4.7.4 fire resistance requirements

Surfaces

  • Aluminum MEBAC®

Finishes

  • MEBAC®
EZ Anchor

Type EZ AnchorFor use with MEBAC® Embedment Nosings in poured in place, pan type or terrazzo stairs.  Integral anchor properly spaced for easy anchoring in wet concrete (2" from each end and 14" - 18" center-to-center). Positive anchorage less tendency for stress cracking of concrete.

Features

  • For use with MEBAC® Embedment Nosings in poured in place, pan type or terrazzo stairs
  • Integral anchor properly spaced for easy anchoring in wet concrete (2" from each end and 14" - 18" center-to-center)
  • Positive anchorage less tendency for stress cracking of concrete

Advantages

  • Economical
  • Low maintenance
  • High strength to weight ratio

Finishes

  • MEBAC®
Share this page: