Anti-Slip Coating Options

MEBAC® Anti-Slip Coatings

MEBAC® coatings can be applied either before or after fabrication of metal components.

However it is recommended that whenever possible, bending or forming of substrate should take place before applying MEBAC®. Also, when holes, cut-outs or attachments are performed on plain plate, they yield a higher quality, lower cost and avoid the excessive tool wearing, uneven cut abrasive edges and scrap that can occur on a surface that already has a MEBAC® coating on it.

We offer five grades of MEBAC® slip-resistant coating, from extremely aggressive to moderately aggressive. All grades of MEBAC® exceed the minimum .60 C.O.F. required by many municipalities.

MEBAC® Coating Options
MEBAC® #1
MEBAC #1

One of the original MEBAC® products, MEBAC® #1 offers the greatest durability and the most aggressive slip resistant surface in the MEBAC® family of coatings. It utilizes the highest concentration of aluminum oxide grit.

Used where superior slip resistance is required, it is available in both our carbon steel and aluminum coatings.

Steel MEBAC® #3
MEBAC #3

MEBAC #3 is the coating of choice in high traffic areas where a slightly less aggressive surface is desired. MEBAC #3 is the product of choice when the finished product will be galvanized.

Available only in the steel MEBAC coating.

MEBAC® #4
MEBAC #4

MEBAC #4 coating has a smaller grit particle that is ideal for areas that may be exposed to bare feet, such as swimming pools and leisure areas. This size particle provides long lasting durability expected from MEBAC coatings and is also easy to clean.

The MEBAC #4 coating is available in either our steel or aluminum coating.

EZ Weld
MEBAC EZ-WELD

EZ Weld is available only in aluminum arc spray on aluminum, carbon steel, or stainless steel substrates.

Manufactured without grit particles, EZ Weld provides our least aggressive surface. Designed for moderate traffic areas that not only require a durable slip resistant surface, EZ Weld also considers the ergonomics of a work place. It is an ideal surface for food processing facilities, or other applications where the degree of slip resistance required is minimal.

Stainless Steel MEBAC®
Stainless steel MEBAC coatings are available for specialized applications. Important considerations in deciding whether to utilize this type of coating will be the longer lead times to be expected with this custom-made product, and significantly higher costs.

 

Share this page:
Downloads
MEBAC Downloads

Download brochures, spec sheets, technical data sheets, test results and fabrication tips & advice...

 
Case Studies
Case Studies

Take a look at our range of case studies to see how you could benefit from our anti-slip coated materials.